The "Mobile Show Room" That Comes To YOU!

Selecting Cushion/Pad

A firm and resilient carpet cushion is necessary to form a good foundation for your carpet, increasing its comfort and extending its life, by absorbing the impact of foot traffic. Cushion also adds insulation and reduces noise. For most residential carpet applications, choose cushion not more than 7/16" thick. If the carpet is a Berber or a low profile carpet, choose a cushion no more than 3/8" thick.

The appropriate carpet cushion, or "pad," provides additional resilience, acoustical, and thermal qualities, comfort underfoot, and can extend the life of the carpet. Cushion should be selected according to the carpet manufacturer's requirements for thickness and density. Improper selection of carpet cushion can accelerate loss of carpet surface appearance, cause wrinkling and buckling, cause separation of the carpet seams, and can cause a breakdown of the carpet structure itself. Improper cushion selection also may void applicable carpet manufacturer's warranties.

Carpet cushion is made primarily from polyurethane foam, fiber, or rubber and is available in a variety of styles and constructions to fit your needs. The type and thickness of cushion you need varies according to traffic levels and patterns. For example, bedrooms, dens, lounge areas and other rooms with light or moderate traffic can use thicker and softer cushion, while living rooms, family rooms, hallways, stairs and other heavy traffic areas require thinner, firmer cushion.

Residential cut pile, cut and loop, or high-level loop carpet requires a resilient, firm cushion with a thickness of 7/16 inch or less. Types of cushion may be various polyurethane foams, including the very common bonded foam product often referred to as "rebond," fiber, or rubber.

Berber carpet, or thinner loop or cut pile carpet is made with large, wide loops and it has been found that a stable, low-flexing, cushion foundation is necessary. A thicker, softer cushion is not acceptable. Cushion thickness should not exceed 3/8 inch for these type products. Again, check with the carpet manufacturer to see if a specific cushion is required. Following are suggested cushions for use under thinner or Berber carpet:

40 ounce rubberized jute

22-28 ounce/sq.yd felted synthetic fiber

8 lbs/cu.ft. bonded or "rebond" polyurethane

64 ounces + flat rubber

2.7 lbs/cu.ft prime polyurethane

10 lbs/cu.ft. or greater mechanically frothed prime polyurethane

Attached cushion—some carpet is made with the cushion attached. With this carpet, a separate cushion is not necessary.

Facts About the Carpet Industry as reported by the CRI

Call us today at 281-355-7657 or send us an email to quote@realcocarpet.com to set up an appointment for our sales team to come to you!